3 Point Floating 2500Nm HVAC Quarter Turn Actuator

3 point floating type quarter turn actuator/low speed with self-locking/HVAC using

Features

• Quarter turn operation, middle position optional
• Self-locking worm gear makes actuator stays in its last position when power lose
• Heavy duty motor with thermal overload protection
• Potentiometer or position transmitter optional to feedback valve position
• Visual valve position indicator
• PTC electronic heating component optional for anti-condensation
• Local emergency power off button optional
• Manual with Allen wrench or handwheel
• CSA certified per UL standard/CE marked

Description

DCL electric actuator can perfect used for 3 point floating type control system, that is commonly used in HVAC field.

Floating control is a variation of On/Off control that requires a fast responding sensor and a slow-moving actuator connected to the final controlled device (valve or damper). When the sensed temperature rises beyond or drops below the set point, the controller sends a signal to activate the actuator on the final device. The actuator starts to slowly drive open or close the hot water valve, increasing or decreasing the heat in the controlled medium. When set point is approached, the actuator stops the final control device (hot water valve) and tries to hold at set point.

So self-locking of electric actuator is the key feature for floating control system. If without self-locking, actuator easily moves away from set point and causes whole system frequently starts and repeats swings in a very small range, which finally result in abrasion of gears.

Specification:

220VAC Quarter Turn Actuator

2500Nm valve Actuator

HVAC Quarter Turn Actuator

3 Point Floating 2500Nm HVAC Quarter Turn Actuator Images